Blow Moulding Machine,Blow Molding Machine Manufacturers & Suppliers
Blow Moulding Machine,Manufacturers Of Blow Molding Machine From Taiwan and China.
 Hot Searches: PET Blowing Machine Stretch Blow Molding PET Bottle Machine Extrusion Blow Molding Auto Blowing Machine 
Product Type  
 
PET/PP Auto Stretch Blow Molding Machine (1)
Accumulator Blow Molding Machine (3)
Automatic Blow Molding Machine (9)
All Products
 
Blow molding machine
 
Home >> Manufacturers >> Kai Mei Plastic Machinery Co., Ltd.
Kai Mei Plastic Machinery Co., Ltd.
· Kai Mei Plastic Machinery Co., Ltd.
 
Products Name: Blow molding machine(PBI-805X, PBI-905X, PBI-1005X,PBI-1105X, PBI-1205X)
PA0045809.jpg
Products Infomation:

Specifications:
Extruder
125mm screw diameter, 28:1 l/d, 350kg/hr output on hdpe
Heating capacity 30kw, 6 zones
100 hp ac motor with inverter drive, 6-62 r.p.m.
225 l/hopper
Die head
16 kg volume
First in first out type, over lapped design new type
40 k.w. heating, 10 zones
550 mm max die Dia.
Full shot 16 kg, 8 seconds
Clamping unit
Fixed non shuttle type clamping unit
100 tons max clamp
Daylight 600-2,000 mm
Platen 1400 x 1400 mm
The barless design with linear guiding, advanced design
Movable front to back
Max mould size 2,000 mm high x 1,000 mm wide x 1000 mm thickness
Hydraulic unit
Motor: 100 hp induction motor
Pump & valve-vickers or yuken
Working pressure 210 bars
Utilises parker advanced design parker proportional valve for enhanced performance
Mechanical details- blow pin unit
Blow pin unit for inner drum threads
Blow pin up/down movement hydraulic
1 blow fin supplied according to samples
Water cooled
Signle inlet design for blowing air
Parison stretch by pneumatic cyclinder
Unscrewing circuitry
Bottom sealing by air cylinder clamp
Mechnical details
Extruder height adjusted by hydraulic motor as standard
Pneumatic unit
ISO valves, filer regulation, blowing air regulation by festo
Takeout device
Guided pneumatically driven take out arm with hydraulic gripper unit, max load 30 kg
Safety
Fully interlocked pneumatically, hydraulically and electrically and suitablyguarded, can also provide light curtains for additional protection
Cycle time
Approx. 220 seconds for a 12 kg container, depending on the efficiency of the mould design, this time is based on a taiwanese, with post cooling 170 seconds
Control
150 hp motor with mitsubishi ac inverter
Man machine interface, basic recipe storage
Moog 200 point parison programmer
Power consumption av. 160 kw/hr
Installed power 289 kw
Dia. Of machine
Machine dim. (L x W x H): 9.5 x 5.6 x 6.35 m3

   
Ohter Product
   
PBI-XBlow Molding Machine
Blow molding machine

Records returned 2  Page 1 of 1   First  Prev  Next  Last

   
Browse By: Search Products | blow moulding machine | blow molding machine | blow moulding machine manufacturers | blow molding machine manufacturers
Copyright © 2011 blow-molding-machine007.com All rights reserved.